{"product_id":"crossing-core-20-e-rig-kit","title":"Crossing Core 2.0 E-Rig Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 style=\"text-align: center;\"\u003eCrossing Core 2.0 E-Rig Kit\u003c\/h2\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-contrast=\"none\"\u003eThe one you've been waiting for... Core 2.0 e-rig with a black silicone sleeve and carb tether, 4-port spinner carb cap and V5 Heater!!\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":0,\"335559740\":240}'\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-contrast=\"none\"\u003eWhen heater housing design and art combines! Meet the new rebuildable ceramic coil for the Core 2.0 E-Rig. The RDA V5 Ceramic Heater works on the original Core also. The original Core coil atomizers work on the Core 2.0 too!\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":0,\"335559740\":240}'\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-contrast=\"none\"\u003e \u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":240,\"335559740\":240}'\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-contrast=\"none\"\u003eThere are a some key differences between the Core and Core 2.0 e-rigs which are as follows:\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eCore 2.0 runs V5 heaters, no wire based coils\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eAtomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFour heat settings are now all for the V5 heaters\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFully rebuildable atomizers – no need to replace the whole housing, just the heater\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eDecreased pre-heat time\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eIncreased session time\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eIncreased total run time (80 second full run time)\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eVortex airflow – included spinner carb cap\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003e“Unbreakable” aluminum carb cap replaces glass bubble carb\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eImproved button function\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eUpgraded Stainless Steel Carb Cap Tube\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan data-contrast=\"none\"\u003eFeatures\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eOne button functionality for ease of use\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFully heated high polish ceramic vaping surface – elements inside base and walls of heater\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eRebuildable atomizer\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eVortex Airflow – Aluminum spinner carb cap with carb cap tether\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eBorosilicate Glass Bubbler\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eStainless Steel Carb Cap Tube\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFour carefully tuned heat settings\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eIsolated Aluminum and Glass Vapor Pathway\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eLow maintenance\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eApprox. 1 hour 45 minute charging time\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003e3150mah Li-Ion Battery Pack.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan data-contrast=\"none\"\u003eWhat’s Included\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eCore 2.0 E-rig Base\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eCore Bubbler\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eAluminum Spinner Carb Cap (based on our design)\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eCarb Cap Tether (black)\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eSilicone Base Cover\/Sleeve (black)\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eAtomizer with V5 heater installed\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eSpare V5 Heater\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eSS316 Dab Tool (based on our design)\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003e4 x Spare Atomizer Screws\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eScrewdriver\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003e2 x Spare Carb Cap Tube O-rings\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003e1 x USB-C Charger\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eCotton buds\/Q-tips\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eAlcohol wipes\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eUpgraded Carry Case\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan data-contrast=\"none\"\u003eButton Functions\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eHold – Manual fire up to 60 seconds\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eTwo clicks – Activate session mode – One click to cancel\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eThree Clicks – Change heat setting\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFour Click – Display power level – Red\/Low – White\/Medium – Green\/Full\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFive Clicks – Lock or unlock Core 2.0 Base\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan data-contrast=\"none\"\u003eSessions times and temperatures\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eThe total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eBlue – 12.5 second pre-heat – Approx. 400°\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eGreen – 13 second pre-heat – Approx. 425°\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eWhite – 17.5 second pre-heat – Approx. 465°\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eRed – 22.5 second pre-heat – Approx. 500°\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan data-contrast=\"none\"\u003eSetup\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eCharge your base using the provided wall plug and cable.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003ePlace bubbler onto Core 2.0 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.0 base, then gently and firmly push it straight down into place.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eCheck small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.0 base.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003ePlace the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eSelect your desired heat setting (start low if you’re not sure).\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eNow that’s all done we get onto the vaping methods as there are different ways the Core 2.0 can be used!\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan data-contrast=\"none\"\u003eMethods of Use\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eCold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eLoad material into the heater\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003ePress the fire button twice to activate session mode\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eWhen your concentrate starts to bubble begin using gently with the carb cap left off\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eWhen the Core 2.0 base vibrates place the carb cap back on and continue your use as you normally would\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFor subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eIf you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eHot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003ePress the power button twice to activate session mode\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eLoad your material onto your dab tool – rice size\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eWait for the Core 2.0 base to vibrate indicating the session temperature has been reached\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eWhile using gently load the dab into the heater, then replace the carb cap and use as your normally would\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFor subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again!\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eAs with cold starts, follow up sessions will always run a little hotter.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eManual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eManual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan data-contrast=\"none\"\u003eCleaning\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eWipe out heater with a Q-tip after each use\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eClean the area around the RDA heater weekly to stop residue building up\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eEvery month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eReplace bubbler water daily\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eTo clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan data-contrast=\"none\"\u003eSafety Features\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eOver-charge\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eOver-discharge\/Low battery\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eOver-heat\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eLow heater resistance\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eShort-circuit\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eNo atomizer\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan data-contrast=\"none\"\u003eCertifications\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eCE Certified\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eROHS Certified Materials\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFCC Certification\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFDA Approved Silicone\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eUN 38.3 Certified Li-Ion Battery Pack.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eWarning Lights – When your Core 2.0 base flashes three times it’s trying to tell you something…\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eBlue – Short-circuit warning\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eGreen – No atomizer warning\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eWhite – Over-heat warning\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eRed – Low battery warning\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":0,\"335559740\":240}'\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-contrast=\"none\"\u003e \u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":240,\"335559740\":240}'\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-contrast=\"none\"\u003eWarranty information\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eFor all warranty claims please contact the store you purchased from.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eThe Core 2.0 power base is covered by a one year manufacturer warranty against defects.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eThe Core 2.0 carry case is covered by a one year manufacturer warranty against defects.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eThe atomizer is covered by a one week manufacturer warranty against defects.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\"\u003eWhile atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":0,\"335559740\":240}'\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Discount E-Nails","offers":[{"title":"Default Title","offer_id":54977740046549,"sku":"roj1789781470986","price":89.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/2060\/7957\/files\/crossing-core-20-e-rig-kit_1.jpg?v=1789781476","url":"https:\/\/promseamclad.shop\/products\/crossing-core-20-e-rig-kit","provider":"My Store","version":"1.0","type":"link"}